I am looking for software help on a CAN interface that is on the TI CP3UB26 microcontroller as well as on the NatSemi/TI CR16 family. Does TI have any software drivers for this CAN peripheral? Thank ...

I have been using TI MCU tms570ls3137 and want to utilize virtual EEPROM on BANK7. so i have proceeded below steps I have generated FEE driver code through Halcogen and included FAPI library. while ...

Hi, I will try it once & get back to you. I am able to boot the U-Boot on AM62x-SK GP EVM U-Boot SPL 2024.04 (Oct 15 2024 - 11:33:46 +0530) SYSFW ABI: 4.0 (firmware rev 0x000a '10.0.8--v10.00.08 ...

We use gmake tool to build our AM62Ax project in windows operation system, sometimes the compiler report error log as the screenshot show,but if we try to rebuild the ...

My customer is using the eeprom function on the TMS570LS0032. They found that serval chips cannot read and erase the eeprom. They use TI's SDK function to read and erase the eeprom, and the function ...

I'm using CC2340R5-Q1 MCU and SDK simplelink_lowpower_f3_sdk_8_10_01_02. I use the basic_ble project and integrate i2ctarget into it. If I2C receives I2C data, it ...

Order of millivolts output swing to be fed into an ADC I'm using currently using TINA-TI to simulate the TIA, with the ultimate goal of producing a tangible physical version of the circuit in the ...

I modified the configuration of a customer board based on the AM62x-evm, and the image and sdk can be successfully compiled through the command. $ MACHINE=am62xx-customer bitbake tisdk-customer-image ...

The difference between case 1 and case 2 with open circuit output lies in whether the output capacitance is large or small. How to determine whether the output capacitance is large or small, and is ...

As the title says, when executing the VIDEO branch of the kmscube use case, the output gstbuf from the decoder module may not be a dma buf. To reproduce this, add the following print statement to the ...

I designed an AC/DC converter using TIDRF62 as a reference. The TIDRF62 uses Wuerth 750314727 however one was not available when I made my design and I used a Myrra 74080. The main difference between ...

does someone has an example for an U-Boot "sspi" command to communicate with an OSPI NOR flash? I would like to read some status information from the XSPI/OSPI NOR flash used for booting on my board ...